Garage Floor Coatings in Walnut Creek CA - a seamless floor that wipes clean
Oil-stained, dusty or cracked garage concrete? We prep the slab first and coat it, so you end up with a floor that mops clean.
What goes into coating a garage floor in Walnut Creek?
A garage floor coating in Walnut Creek means grinding the bare concrete, fixing what's damaged and building a coating on top, so you end up with a seamless floor that's easy to clean and looks finished.
Most people call when the garage floor starts bothering them, with oil spots that won't scrub out, dust that tracks into the house, or cracks spreading near the door. The price mostly comes down to the size of the garage, how much grinding and repair the slab needs, any moisture coming up through it and the finish you choose. The schedule turns on that same prep plus the days the coating needs before you can park on it, and the written estimate I give you after looking at your slab is where your own number comes from.
If the concrete is too far gone for a coating alone, resurfacing the slab can come first, and I'll tell you on the visit if I think yours needs it.
- We clear off old coatings, paint and loose concrete so the new system bonds to solid slab.
- Cracks and chipped, flaking spots get filled and repaired during prep, before any coating goes down.
- The system goes on in layers, a base coat, optional color flakes and a clear topcoat.
What happens when you call us about a garage floor in Walnut Creek?
Here's how a garage job runs with us, from your first call to the day you get your garage back. I look at every job myself, so the person who sees your slab plans the work.
Call or send a message
Call (925) 433-7858 or use the form, and we'll set a time for me to come out. It's a short conversation about your garage and which days suit you.
I look at your slab
I check the concrete for moisture, old coatings, oil stains and cracks, then walk you through what I see and which options fit your garage. You get a written estimate, so you have a real number in hand before you decide anything.
We prep and coat the floor
Once you say yes, our trained installers do the work with me on site, and we're fully licensed and insured. We grind, repair and coat the floor in the order we talked through at the estimate, so you know what's happening each day.
We walk the finished floor
Before we pack up, I go over the finished floor with you and tell you when it's ready to walk on and drive on. We back it with satisfaction guaranteed on every job, and that walk-through is the time to point out anything that doesn't look right to you.
Epoxy and concrete floor coatings in garages and homes
These photos show the kinds of coated concrete floors our trade puts down, from flake garage floors to smoother solid finishes. They're here to help you picture the options before I come out and look at your slab.
Glossy metallic epoxy floor with swirling black, gray, and white patterns in a gallery-like room.
Close-up of a gray speckled concrete floor with two diagonal control joints crossing.
Speckled concrete resurfacing covers an outdoor walkway beside a stone wall and black railing.
Empty garage with a sealed, speckled concrete floor reflecting the lights and walls.
Polished gray terrazzo floor reflects the windows and furnishings of a bright, modern showroom.
A polished garage floor has glossy black and vivid red bands, reflecting the shelves and cabinets around it.
Get a written estimate for your garage floor
Send the form or call (925) 433-7858 and we'll reply within one business day to set up a free on-site estimate, with no obligation. Tell us your garage size, any oil stains or cracks, and whether it sits below ground.
(925) 433-7858Questions people ask about coating a garage floor
These are the questions I hear most when I'm standing in someone's garage looking at the slab. If yours isn't here, ask me on the visit and I'll explain what I'm seeing.
How much does it cost to coat a 2-car garage floor with epoxy?
Across the US, an epoxy coating for a 2-car garage floor usually runs about $1,100 to $4,300 per project, and that's the market's range, not our price. Where your garage lands depends on its size, the repairs and the finish, and my written estimate gives you your own number.
How long does it take before I can park on a new garage floor coating?
One coating vendor puts the industry standard at a minimum of 72 hours or more before cars drive on the floor, and temperature and humidity can stretch that. We'll help you work out where the cars go for those days before we start.
Can you put epoxy on a garage floor that's below ground level?
One maker says the risk of moisture coming through the slab in a below-grade garage is very high and recommends against epoxy there, so raise it before you pick a system. I check the slab for moisture on my visit and talk you through what that means for your options.
How do I clean an epoxy flake garage floor?
A neutral pH cleaner and a microfiber mop are usually all a flake floor needs, and it's one of the easiest floors to keep up. Leave acidic cleaners and rough, abrasive scrub pads out of the routine.
What causes a garage floor coating to peel?
Most peeling comes from the prep, when the coating goes onto concrete that wasn't roughened enough, still had oil in it or had too much moisture coming up from below. That's why most of our time on a garage goes into the slab before any coating goes down.
Do I need to empty my garage before getting the floor coated?
Yes, the floor needs to be cleared out, since we grind and coat the whole slab. One coating supplier's instructions also say all flame sources and pilot lights should be off during application, which matters if your water heater sits in the garage, so we'll plan for that ahead of time.
Garage floor coatings in Walnut Creek and the cities around it
Walnut Creek's permit-free list doesn't name floor coatings, so we ask the city's building staff whether your job needs one and tell you before work starts. We're based here and see the same oil-stained, cracked slabs in Lafayette and Concord garages.