Walnut Creek Truefinish Epoxy FloorsWalnut Creek Truefinish Epoxy Floors(925) 433-7858
Walnut Creek Truefinish Epoxy Floors
(925) 433-7858Get an estimate

Flooring Contractor in Vallejo, CA - Coated, Polished and Sealed Concrete Floors

Walnut Creek Truefinish Epoxy Floors is a flooring contractor based in Walnut Creek, CA, and we coat, polish, seal and resurface concrete floors for homes and businesses in Vallejo, from garages and basements to patios, pool decks and shop floors.

Get an estimate(925) 433-7858
Empty beige garage with a glossy gray, speckled polyaspartic floor and a white door at the far end.

What we see on Vallejo floors, home and business

Vallejo is a waterfront city at the outer edge of the Bay Area, and the floors people want help with here are the same ones we work on across the cities around Walnut Creek. Homeowners ask about garages, basements, patios and pool decks, and business owners ask about shop and kitchen floors. It's the same work we do in Antioch and Concord, and we plan it the same way.

Every floor in a lived-in house or a busy business has a history, from old paint and oil spots to past patches. That history shapes the job more than anything else, so on a Vallejo floor I start by checking the slab before anyone talks about color.

Floor work we do for Vallejo homes and businesses

We bring all sixteen of our floor services to Vallejo, for homes and for businesses. Most jobs start the same way, with me on site looking at the concrete and telling you what's going on with it before we talk about finishes. From there we match the system to how you use the floor, whether that's a car parked on it every night, a family walking on it barefoot or a kitchen crew on their feet all day, and we plan the prep first because that's what decides how the floor holds up.

What these concrete floors look like finished

These photos show the kinds of floors we put down, from coated garages to polished slabs and pool decks. They're examples of each finish rather than one particular house, so ask me at the estimate which one fits yours.

  • Glossy red industrial floor surrounds rows of stainless steel tanks and processing equipment in a brightly lit facility.

  • Close-up of a gray speckled concrete floor with two diagonal control joints crossing.

  • Speckled epoxy floor in a large industrial interior with gray walls and exposed metal framing.

Planning a floor job in Vallejo, from permits to price

Two things get settled before we set a start date in Vallejo. One is the permit question, and the other is what your particular floor needs, which is also what sets the price.

Permit questions start with the city

Permit questions for work on a home in Vallejo start with the city's Central Permit Center, which you'll find on the City of Vallejo website. I won't guess whether your floor needs one, so when a job might, we check with the city before work starts and tell you what we find. If a permit turns out to be part of it, we set the start date around it.

Your part is small. Tell us what you're planning when you call, and if you'd like to look into it yourself, the same city site lists its offices and services, so we can compare notes. Our part is asking the city the right question and letting the answer shape the plan before anyone starts grinding.

  • Mention any past permits or recent remodels you know about at the estimate.
  • We pass along what the city tells us, in plain words.
  • Ask us about permit steps when you call or send the form.

What moves the price and the schedule

Three things set the price of a floor: how big it is, what shape the concrete is in and which system you pick. Of those, the slab's condition is the one I can only judge in person, because old coatings, oil, cracks and moisture all add prep, and prep is where most of the work on a floor goes.

The schedule turns on the same prep, on how long the coating you pick needs to cure before you can walk or drive on it, and on any permit answer from the city. That's why I come out to look at every job myself, and why your own price comes from that visit rather than a guess over the phone.

  • Old paint, sealer or failed epoxy adds a stripping step first.
  • Moisture coming through the slab changes which system we can use.
  • Faster-curing coatings get you back on the floor sooner.

Get a free on-site floor estimate in Vallejo

Tell us what you're planning for your Vallejo floor and ask anything about permit steps, by calling (925) 433-7858 or using the form. We reply to every call and message within one business day to set a time, and then I come out to look at the floor myself. The estimate is free and there's no obligation to go ahead.

(925) 433-7858

What Vallejo floors usually need before the coating goes on

Floors in Vallejo homes and businesses wear the same ways we see across the cities around Walnut Creek. These are the conditions I check for first, because each one changes the prep.

  • Oil spots and peeling garage paint

    Garage floors pick up oil drips, tire marks and sometimes a roll-on paint kit that's peeling at the edges. A new coating won't grip any of that, so we strip and grind it off and clean the oil out of the concrete before anything goes down.

  • Moisture coming up through the slab

    Concrete poured on the ground can pass moisture up from underneath, and basements and lower floors are where it shows most. A coating laid over a damp slab can lift or bubble later, so we test for moisture before we choose the system for your floor.

  • Cracks, chips and low spots

    Most slabs that have been lived on for years have hairline cracks, chipped edges or a low corner where water sits. We fill and patch those first, and level the low spots when they're bad enough to show through a new floor.

  • Old sealers and coatings underneath

    A lot of floors already have something on them: an old sealer, a worn coating or tile glue from a floor that came up. We find out what it is before we quote, because it decides whether the job starts with stripping.

  • Worn patios and pool decks

    Outdoor slabs take bare feet, pool water and hose-downs, and older finishes there wear thin, crack or turn slick when wet. We look at drainage, texture and the concrete's condition together, since an outdoor coating has to grip as well as look right.

How we work on a Vallejo floor, start to finish

Most of what makes a floor hold up happens before the coating goes on, where you'd never see it. Here's how we handle that part, and who you'll be dealing with on your Vallejo job.

I explain your slab before we touch it

When I come out, the first thing I do is look at the concrete itself, not the color chart. I check what's on it and what it's been through, and I tell you what that means for the floor you want. I spent my first years in the trade on new slabs in empty buildings, and floors in lived-in homes need that extra look.

I'd rather you understand your own floor well enough to make the call yourself. If you talk to other contractors, you'll know which questions to ask them about prep, because the prep nobody sees is what decides how a new floor holds up. That's also why we won't skip grinding or a moisture check to save time, even when a floor looks fine on top.

  • I work beside our installers

    Surprises under an old coating do happen, and I'd rather be there when they do. Our trained installers do the work with me on site, so you're talking to the person who looked at your floor and quoted it.

  • Built for homes people live in

    I started this business in 2021 to work in houses where a family has to live around the job. We plan the work so you know which rooms are off limits, when the garage is usable again and what to move out beforehand.

  • Fully licensed and insured

    We're fully licensed and insured, and I'm happy to go over both with you at the estimate. It's worth asking anyone who'll be grinding concrete in your house, because heavy equipment and coatings are where things can go wrong.

  • Satisfaction guaranteed on every job

    That's our promise, and it starts with a walk across the finished floor with you before we pack up. If anything doesn't look right to you, that's the time to tell me. To get started on a Vallejo floor, call (925) 433-7858 or use the form on this page.

Questions Vallejo homeowners ask about floor work

These are the questions that come up when someone in Vallejo plans a floor job, from price to the city's hours. If yours isn't here, ask me at the estimate and I'll walk you through it.

How do I figure out what an epoxy garage floor will cost in Vallejo?

You get your own figure at the estimate, because the price comes from the slab in front of us, not the city it's in. The choices that raise it most are a decorative finish like metallic epoxy, extra prep such as stripping an old coating or dealing with moisture, and a faster-curing polyaspartic system if you need the garage back quickly. A plain coat over sound concrete sits at the lower end.

When is the City of Vallejo open?

The city lists general hours of Monday to Thursday, 8:30 AM to 5:00 PM, and every other Friday during the same hours. Those are the city's overall hours rather than any one office's, so check the city site before you plan a visit about a floor job.

Is there a historic district in Vallejo?

Yes, Mare Island has a historic district. The group that runs tours on the island describes St. Peter's Chapel as a key part of the Mare Island Historic District. If the floor you want redone is in a building on Mare Island, tell us when you call, and we'll include that when we check with the city.

How do I get urgent notices about road closures in Vallejo?

The city site describes an alert system that agencies within Solano County use to send critical information, such as severe weather, unexpected road closures and evacuations of buildings or neighborhoods. It's a simple way to hear about closures before you head out. If one changes when our crew can reach you on a work day, we'll call to let you know.

Service areas

We're based in Walnut Creek and work across the cities around it, including the ones listed here and others nearby. If you don't see your city, call (925) 433-7858 or send the form and ask.

Ask about your location
(925) 433-7858Get an estimate