Walnut Creek Truefinish Epoxy FloorsWalnut Creek Truefinish Epoxy Floors(925) 433-7858
Walnut Creek Truefinish Epoxy Floors
(925) 433-7858Get an estimate

Flooring contractor in San Ramon, CA - floors that start with careful slab prep

Walnut Creek Truefinish Epoxy Floors is a flooring contractor based in Walnut Creek. In San Ramon we coat, polish, seal and resurface concrete floors in garages, basements, patios, pool decks, shops and commercial kitchens.

Get an estimate(925) 433-7858
Textured gray concrete resurfacing across an outdoor patio beside a house, with a built-in counter casting patterned shadows.

San Ramon floors, as we see them on the job

San Ramon sits down the 680 from our home base in Walnut Creek, just past Danville, so it's an easy run for our crew.

It's mostly a city of homes, from established neighborhoods on the valley floor to newer subdivisions on graded hillsides, with offices, shops and restaurants mixed in along the main roads. The calls we get here look like the ones across the area: garages that need a tougher floor, patios and pool decks that have faded or cracked, and business floors that take hard daily use. What shapes each job is the slab itself, how it was poured, what's been put on it since and how it has moved, which is why I look at it before we talk about finishes.

Floor services we bring to San Ramon homes and businesses

We bring our full list of services to San Ramon, from garage and basement floors to pool decks, patios, shops and commercial kitchens. Every job starts the same way. I come out, look at the slab myself, check for cracks, moisture and old coatings, and explain what I find. Then we pick the system that fits how you use the room, and our trained installers do the work with me on site. Each card below links to the full page for that service.

What these floor finishes look like once they're down

These photos show the kinds of finishes we install, from flake garage coatings to metallic epoxy, polished and stained concrete. They're examples of the work, so ask me at the estimate which one suits your slab.

  • Glossy red industrial floor surrounds rows of stainless steel tanks and processing equipment in a brightly lit facility.

  • Close-up of a gray speckled concrete floor with two diagonal control joints crossing.

  • Close-up of a glossy metallic epoxy floor with flowing black, white, and bronze swirls.

Working in San Ramon: permits, licenses and pricing

San Ramon has its own permit office, and California has its own license rule for contractors. Here's how both touch a floor job, and what actually moves the price and timing at your house.

Permits and licenses before we start

In San Ramon, building permits come from the city's Building & Safety office. The city keeps a list of home improvements that need no permit, and I don't assume a floor job falls on it, so when yours might need one, I check with the city before work starts and tell you what I find. If a permit is needed, work waits until it's issued.

Two licenses are worth checking before you hire anyone. California's Contractors State License Board licenses the businesses and people who build or alter structures in the state, and a business located in San Ramon also needs a city business license. We're fully licensed and insured, and the questions further down cover when the state license applies to a job like yours.

  • We check permit needs with the city before work starts.
  • When a permit is needed, the start date waits for it.
  • Ask anyone you're comparing for their California contractor license.

What sets the price and the schedule

The biggest thing that moves the price is the slab you have. Old sealer or paint that has to come off, cracks that need filling and moisture that calls for a different primer all add prep time before a coating goes down. After that it's the size of the floor and the system you pick, since a metallic or full-flake finish takes more material and labor than a clear seal.

The schedule turns on the same things plus cure time, because each coat has to set before the next one goes on and before you put weight on it. A garage or kitchen has to be cleared first, so we plan the work around when you can do without the room. Your own price and timing come from my visit, after I've looked at the slab itself.

  • Old coatings, glue or paint to remove add prep time and cost.
  • Moisture coming up through the slab changes the primer and system.
  • Cracks and low spots get repaired before any coating goes down.

Get a free on-site floor estimate in San Ramon

Call (925) 433-7858 or send the form, and we'll reply within one business day to set a time. I come out to your San Ramon home or business myself, look at the slab and explain what I find. The estimate is free, with no pressure and no obligation.

(925) 433-7858

What San Ramon homes and slabs bring to a floor job

Every slab has a history, and the ones here are no different. These are the conditions I look for first when I check a San Ramon garage, patio or shop floor.

  • Expansive soil under the slab

    The city's building code addresses expansive soil in San Ramon as a citywide condition, not a report on any one lot. That kind of ground swells when wet and shrinks as it dries, which can crack slabs, so I check every crack before we pick a system.

  • Garages that do more than park

    Many garages we see double as a gym, a workshop or overflow storage, so the floor takes dropped weights, rolling toolboxes and spilled chemicals along with tires. I ask how you use the room first, because that decides between a flake epoxy, a polyaspartic topcoat or something heavier.

  • Patios and pool decks in sun

    Backyard patios and pool decks sit in strong sun, and coatings not made for it fade and chalk. Outdoors we lean toward finishes that hold their color and keep grip when wet, and we check how water drains so it doesn't sit on the new surface.

  • Old sealers and past repairs

    Plenty of slabs we see already carry a sealer, a store-bought coating, paint or patches from a past owner. None of that matters until a new coating has to stick to it, so we test what's there and grind off whatever won't hold.

  • Business floors with tight hours

    Shops and commercial kitchens can't stay closed for long, and their floors take carts, grease and daily washdowns. We plan the system and the order of work around your hours, so before we start you know which areas will be out of use.

How we work on San Ramon floors, start to finish

I started this business in 2021 to work in homes people actually live in. Here's how that shows up on your job, from the first look at the slab to the last coat.

We explain your slab before we touch it

Before I talk about colors or finishes, I walk the floor with you and show you what I see: cracks, old coatings, damp spots and anything else that changes how a new floor holds up. I'd rather you understand your own slab well enough to ask good questions of anyone you talk to, including us.

That's because the prep nobody sees decides how a floor holds up. I spent my first years in the trade on new construction, coating slabs in new buildings, and that's where I learned a coating only grips as well as the concrete under it. In a lived-in house the slab has more history, so we spend the time on grinding, repairs and testing before any coating goes down.

  • I see every job in person

    I come out to look at every job myself, and our trained installers do the work with me on site. The person who walked your floor and made the plan is there when the grinder starts, so nothing gets lost between the estimate and the install.

  • Licensed, insured and guaranteed

    We're fully licensed and insured, and our promise is satisfaction guaranteed on every job. Ask me about either when I'm out at your house, because you should know exactly who is working on your floor before anyone starts.

  • Five years in lived-in homes

    We've been in business since 2021, five years now, working in garages, basements, patios and pool decks that families use every day. We plan around the people in the house, which rooms stay open, how dust is handled and when the room is yours to use again.

  • Open evenings and weekends

    You can reach us Monday through Friday from 8 AM to 10 PM, and Saturday and Sunday from 7 AM to 9 PM. That means you can call (925) 433-7858 after work or on a weekend morning, without taking time off to ask about your floor.

Questions about floor work in San Ramon

These are questions that come up about floor work in San Ramon, from permits to cracked slabs. If yours isn't here, call and ask, because I'd rather you know before we start.

Do I need a permit to tear out old flooring in San Ramon?

Usually not, since the city's list of work that needs no permit includes removing and replacing carpet, floor tile or vinyl. The exception is when a termite report, water damage, or framing or subfloor changes are involved, and an exemption doesn't cover work that breaks the code. That exemption is about floor coverings, so on a coating or overlay job I still check with the city first.

How do I know if a flooring contractor needs a state license in California?

A contractor needs a California state license when the project requires a building permit, uses any additional workers, or costs $1,000 or more in labor and materials combined. The state licensing board lists a job as possibly exempt only when no permit is required, no employees do the work and the total stays under $1,000. A floor job done by a crew uses workers, so ask for the contractor's license before you sign.

What causes cracks in garage floors in San Ramon?

Most garage floor cracks come from the concrete shrinking as it cured and from the ground moving underneath, and the expansive soil noted above makes that movement more of a factor here. A coating doesn't stop a slab from moving, so we fill and prep each crack based on whether it's still active. If one is, I'll tell you before we start that it may show through the new floor.

How much does a garage floor coating cost in San Ramon?

Your price comes from my visit, because it rests on the size of the floor, the shape the slab is in and the finish you pick. Cracks to repair, old sealer to grind off and moisture coming through the slab all add prep, while a solid-color coating on a sound slab sits at the lower end. Call (925) 433-7858 and I'll come out, look at your floor and price it.

Service areas

We're based in Walnut Creek and work across the cities around it, including Danville, Alamo, Pleasant Hill and the others listed below. If your city isn't listed, call or send the form and ask.

Ask about your location
(925) 433-7858Get an estimate