Walnut Creek Truefinish Epoxy FloorsWalnut Creek Truefinish Epoxy Floors(925) 433-7858
Walnut Creek Truefinish Epoxy Floors
(925) 433-7858Get an estimate

Flooring contractor in Alamo, CA - floors built for busy garages and pool decks

Walnut Creek Truefinish Epoxy Floors is a flooring contractor based in Walnut Creek that coats, polishes and resurfaces concrete in Alamo homes, from garages and basements to patios and pool decks, plus shop and kitchen floors for local businesses.

Get an estimate(925) 433-7858
Brown stained concrete patio with a geometric border beside a house and lawn.

Alamo homes and the floors people call us about

Alamo sits just south of Walnut Creek, where we're based, and the homes we see there are mostly single-family houses on roomy lots, with attached garages, backyard patios and, often, a pool. Homeowners call us about those spaces and about basements, and a few business owners call about shop and kitchen floors. The work is a lot like what we do in Danville and Lafayette, in houses where a family keeps living while we're on the job.

Many of those houses have been lived in for years, and their concrete carries that history in old paint, worn sealers, oil stains and patched cracks. That's what shapes the job here, because how much of it has to come off decides how much prep comes before the new floor.

Concrete floor and coating work we do in Alamo

In Alamo the call is usually about a garage, a basement, a patio or a pool deck, and every job starts with me looking at the concrete in person. What I check first is what's on the slab and what's under it, like old sealers, oil, cracks, moisture and worn spots. That tells us how much grinding and repair comes before any coating, and which of the systems below fits the way you'll use the space. We plan the work around your household, so you know when you'll lose the garage or patio and for how long.

Finishes we install on concrete floors and decks

These photos show the kinds of finishes we put down, from flake garage coatings and metallic epoxy to polished and stained concrete. They're a good place to start thinking about color and texture before we look at your slab.

  • Glossy red industrial floor surrounds rows of stainless steel tanks and processing equipment in a brightly lit facility.

  • Close-up of a gray speckled concrete floor with two diagonal control joints crossing.

  • Close-up of a glossy metallic epoxy floor with flowing black, white, and bronze swirls.

Working in Alamo, where the county handles permits

Alamo has no city government of its own, unlike Walnut Creek next door, so a few things work differently here. Here's what that means for a floor job, and what sets the price and the timing.

Contra Costa County handles permits for Alamo

Because Alamo isn't a city of its own, Contra Costa County issues building permits and handles inspections here, not a city hall. That matters for a floor job in two ways. Whether your project needs a permit is the county's call, and any permit has to be in place before work starts, which can move your start date if one is needed.

Before work starts, I check with the county office that covers your address and tell you what I find. The county only issues permits to licensed contractors, property owners or an agent the owner has authorized, which is one more reason to confirm a contractor's license. To make sure the county covers your address, its CCMAP map tool will show you.

  • Check the contractor's license with the Contractors State License Board before you sign.
  • Ask whether they hold a Contra Costa County business license for Alamo work.
  • Ask who checked the permit question and what the county said.

What moves the price and the schedule

Price comes down to the size of the area, the shape the slab is in and the system you choose. Grinding off an old coating, filling cracks and dealing with moisture all add work before anything new goes down, and a decorative flake or metallic finish takes more steps than a plain coat. Your own figure comes from seeing your slab in person.

The schedule turns on the permit check, how much prep the slab needs and how long the coating you pick has to cure before you walk or drive on it. A faster-curing system gets your garage back sooner, while some finishes need more time between coats. We'll go over that timing with you before the first day of work.

  • Old coatings, paint or sealer on the slab mean more grinding first.
  • Cracks, pitting and low spots get repaired before any new floor goes down.
  • Outdoor patios and pool decks need coatings made for sun and water.

Get a free on-site estimate for your Alamo floor

Tell us about your floor and ask any permit questions you have, by phone at (925) 433-7858 or with the form, and we'll reply within one business day. I'll set a time to come out to your Alamo home, look at the slab with you and walk you through what I find. The estimate is free, and there's no obligation to go ahead.

(925) 433-7858

What we see on Alamo houses, garages and yards

Houses here tend to share a few things, and they shape what we check and how we prep. These are the conditions we plan for before we price a floor in Alamo.

  • Garages that do double duty

    A lot of garages here park cars and also serve as a gym, a workshop or the family's storage room. That means oil drips, dropped weights, rolling toolboxes and grit all on one slab, so we pick a coating and a texture that stand up to the hardest use in the room, not the average.

  • Long driveways, set-back garages

    Homes on larger lots often have long or steep driveways and garages set well back from the street. We check access at the estimate, since our grinders, dust collectors and materials have to get to the slab, and where we park and run power affects how the day goes.

  • Patios and pool decks outdoors

    Backyard patios and pool decks get sun, sprinklers, pool water and bare feet, which is a different job from a garage. We use coatings meant for outdoor concrete and add texture where people walk wet, because a smooth, glossy deck can get slick.

  • Moisture you can't see

    Basements and older slabs can push moisture up through the concrete, and you can't always see it. We test before we choose a system, because moisture coming up from below is one of the usual reasons a coating lifts, and the fix belongs in the plan, not after.

  • Lots near creeks

    Some lots here back onto a creek. The county's drainage plan rules can reach work within 100 feet of the top bank of a mapped creek or stream, so when a job goes beyond recoating existing concrete, I ask about the lot early and check it with the county.

How we work on Alamo floors, and why it matters

I started this business in 2021, after my first years in the trade coating slabs on new construction. Here's how we run a job in a house where a family is living around the work.

We explain the slab before we touch it

On new construction, nobody was living with the floor yet. In a home, every slab has a history, and I'd rather show you what I see than ask you to take my word for it. I start with what's on the surface and what's under it, the old coatings, the cracks, the stains and any sign of moisture, and tell you what each one means for your floor.

Then we talk through the options and the trade-offs, like a faster cure against more time to work the finish, or a polished slab against a coating. The goal is that you understand your own floor well enough to make the call yourself, and to ask good questions of anyone else you're talking to, us included.

  • I look at every job myself

    Every estimate in Alamo is mine to do in person, and I'm on site with our trained installers while the work happens. The person who looked at your slab and explained the plan is the same person making sure it gets done that way.

  • Prep gets the most time

    Grinding, crack repair and cleaning are the parts of the job nobody sees once the floor is down, and they decide how it holds up. We don't shortcut them to save a day, because a coating over poor prep is the one most likely to lift.

  • Planned around your household

    A family has to live around the job, so we plan which rooms are off limits and when, keep the work area closed off while coatings cure, and tell you ahead of time when you can walk or park on the floor again.

  • Licensed, insured and easy to check

    We're fully licensed and insured, and you're welcome to ask for proof and check it with the state board yourself. Our promise is satisfaction guaranteed on every job. To talk through your floor, call (925) 433-7858 or send us the form on this page.

Common questions about floor work in Alamo

These are the questions Alamo homeowners usually ask about permits, licenses, payment and cost before a floor job. If yours isn't here, ask when you call, and I'll answer it or find out.

How do I find out if my floor project in Alamo needs a permit?

Ask the county's permit staff, because the county's permit list doesn't name floor coatings either way. The county says almost all projects in areas like Alamo need a building or grading permit, and the work it lists includes remodels, alterations, repairs, decks and pools, so a floor that's part of a remodel or a pool project is worth raising with them.

Does a flooring contractor need a Contra Costa County business license to work in Alamo?

Yes, the county requires a business license, which works as an annual tax, for doing business in its unincorporated areas, Alamo included. It applies to state-licensed contractors no matter where they're based, and a contractor based in a city like Walnut Creek needs that city's license and the county's. The county's charge is $100 a year plus $10 per employee.

How much of a down payment can a contractor ask for on a floor job in Alamo?

In California, a contractor's down payment can't be more than $1,000 or 10 percent of the total contract price, whichever is less. The state contractors board sets that cap for all home improvement projects, so it covers a garage floor or a pool deck in Alamo the same as anywhere else in the state.

What causes the cost of resurfacing a pool deck in Alamo to go up?

The biggest cost drivers are how much damage the deck has and how much of the old surface has to come off before anything new goes down. Deep cracks, peeling coatings and spots where the top layer has flaked away all need repair first, and the deck's size, its shape around steps and the pool edge, and the texture and color you pick add to it. I'll give you your own number once I've seen the deck.

Service areas

We're based in Walnut Creek and work in the cities around it, including the ones listed here and others nearby. If you don't see your city, call (925) 433-7858 or send the form and ask.

Ask about your location
(925) 433-7858Get an estimate