Commercial & Industrial Epoxy Floor Coatings in Walnut Creek CA - a floor that holds up
Shop, warehouse or kitchen floor peeling, dusting or slick by the end of a shift? We prep the slab properly and put down a coating that fits how you work.
What goes into an epoxy floor for a shop, warehouse or kitchen?
Commercial and industrial epoxy floor coatings in Walnut Creek, CA, start with properly prepared concrete and finish with layers of epoxy or urethane, so a shop, warehouse or kitchen gets a floor that cleans up easily and takes daily traffic.
Most business owners call when the floor has started working against them. The old paint is letting go at the doorways, the concrete is stained and dusty, or the kitchen gets slick by closing time. I spent my first years in the trade coating slabs on new construction, and on a commercial job the first thing I want to know is how the space gets used and how long you can afford to be closed, because that decides which system fits. We're based in Walnut Creek and work across the cities around it.
What moves the price is the size of the floor, how much old coating or glue has to come off, which system fits your traffic, and whether we work around your business hours. The schedule turns on the slab itself, mainly its age and how dry it is, and on how many days you can close. The written estimate I give you lays out the prep, the system and the price for your floor.
- Shops, warehouses, showrooms and commercial kitchens, where floors take carts, spills and steady foot traffic.
- Old coatings, worn paint and leftover glue get checked first, since they change how prep is done.
- A coating system chosen for your traffic, your cleaning routine and how many days you can close.
What happens after you call about a commercial floor?
A commercial floor job starts with questions about your space, not a sales pitch. Here's how it goes from your first call to the walkthrough on the finished floor, with me on site along the way.
Tell us about your floor
Call (925) 433-7858 or send a message with the floor's size, what happens on it each day, how much foot traffic it gets and any old adhesive you know about. We get back to you to set a time for me to come out.
I look at the slab
I come out myself and check the concrete for moisture, old coatings and cracks, then ask how long you can stay closed. I walk you through what I see and which systems fit your traffic.
You get a written estimate
The estimate spells out the prep, the coating system and the price, so you know what you're paying for before you decide. It also gives you something concrete to compare against anyone else you talk to.
We prep, coat and walk it
Once you say yes, our trained installers and I prep the floor properly, put down the system we agreed on and go over the finished floor with you before we pack up. Satisfaction guaranteed on every job.
Ground concrete and epoxy coatings on working floors
These photos show the kind of work this trade does, from freshly ground concrete to finished coated floors. They're here to show the finishes and textures we talk through on site, not particular jobs of ours.
Glossy light-gray epoxy floor in a clean industrial room with exposed ducts, pipes, and bright ceiling lights.
Garage with a glossy metallic epoxy floor in vivid blue, black, and white swirls.
Close-up of a glossy epoxy floor coating with dense black, white, and gray decorative flakes.
White classic car parked on a speckled epoxy garage floor beside an open doorway to greenery.
A glossy gray-and-white flake-coated garage floor extends to the driveway, where a silver pickup truck is parked.
Empty beige garage with a glossy gray, speckled polyaspartic floor and a white door at the far end.
Get a written estimate for your shop or kitchen floor
Send the form and we'll reply within one business day to set up a free on-site visit, where I look at your slab myself. The written estimate comes with no pressure and no obligation.
(925) 433-7858Common questions about commercial epoxy floors in Walnut Creek
These are the questions business owners and property managers ask me most before a commercial floor job. Where an answer comes from a coating maker or a national publisher, I say so, since your slab may differ.
How long will a commercial epoxy floor last?
One national flooring publisher estimates 2 to 4 years in commercial traffic for a thin roll-on coat, and 7 to 12 years for a 100% solids epoxy, the thick kind with no solvent in it, finished with a topcoat. That's why I usually point a floor in steady use toward the full solids system, since redoing a floor means closing again. How long yours lasts also depends on the prep underneath.
How long does a commercial epoxy floor take before my business can reopen?
With a polyaspartic topcoat, a fast-setting top layer, one national flooring publisher says the floor can go back into service in 24 hours. It costs more per gallon, and the same publisher says it's usually worth it when the space earns money, because you reopen sooner. Prep and base coats come first, so your estimate shows the whole closing window for your floor.
How much does a commercial epoxy floor cost in Walnut Creek?
I give you a price in a written estimate after I've seen the slab, because the floor's size, its prep and the coating system decide the number. One national flooring publisher notes that night and weekend work adds to the price of a commercial job, so if staying open matters, ask for the estimate priced both ways. A thin coat costs less now but needs redoing sooner, as the lifespan answer above shows.
Can a new concrete slab be coated with epoxy right away?
No, one coating maker's guide says new concrete must be at least 28 days old before it's coated. On a new building or a freshly poured section, that means the pour date sets the earliest day we can start, so tell me when the concrete went in.
What causes a commercial epoxy floor to peel or flake?
Peeling usually comes from the prep, not the epoxy. Coating over smooth, dirty or damp concrete, or over an old coating that's already letting go, leaves the new layers nothing solid to grip, and heavy traffic finds that weak spot fast. That's why I spend the first visit on the slab and not on color charts.
How do I get my shop ready for an epoxy floor job?
Clear everything off the floor that can move, and plan where staff, deliveries and stock will go while the area is closed off. Fixed equipment is something we work out together on site, so mention it when you call.
Commercial and industrial epoxy floor coatings around Walnut Creek
Contra Costa County Environmental Health requires plan review when a restaurant, food facility, pool or spa replaces or installs floors. We're fully licensed and insured, we check with that office first, and we also work in Concord and Pleasant Hill.