Walnut Creek Truefinish Epoxy FloorsWalnut Creek Truefinish Epoxy Floors(925) 433-7858
Walnut Creek Truefinish Epoxy Floors
(925) 433-7858Get an estimate

Flooring contractor in Concord, CA - floors prepped right before they're coated

Walnut Creek Truefinish Epoxy Floors is a flooring contractor serving Concord, CA. We coat, polish, seal and resurface concrete floors in Concord garages, basements, patios and pool decks, plus shop and kitchen floors for local businesses.

Get an estimate(925) 433-7858
Gray flake epoxy floor in a commercial washroom with sinks, partitions, and a floor drain.

Concord homes, garages and the floors we work on

Concord sits right next to Walnut Creek, where we're based, so it's a short drive for me to come look at your floor and for our crew to get to work. We do the same work next door in Pleasant Hill and further out in Oakland.

Concord has a lot of single-family homes and duplexes, and the floors we're asked about here are mostly the everyday concrete in them, like attached garages, backyard patios, pool decks and the occasional basement, plus shop floors and kitchens for local businesses. Because so many of those slabs are in rooms you use every day, we plan each job around when you need your cars, tools or patio furniture back, and around whatever is already on the concrete when we arrive.

Floor services we offer for Concord homes and businesses

Every service below is available in Concord, and most jobs start the same way, with me looking at your slab in person. What's already on the concrete and how you use the room decide which system makes sense, since a garage with years of oil drips needs different prep than a bare patio. From there we choose the coating, polish or overlay, plan the grinding and repairs, and work out when you'll lose use of the space and when you'll get it back.

  • Epoxy Floor Coatings

    Concord garages and workrooms often have bare concrete that dusts, stains and soaks up spills. We grind the slab open and lay an epoxy coating that wipes clean and stands up to everyday use.

    Explore service

  • Commercial & Industrial Epoxy Floor Coatings

    Shops, warehouses and restaurant kitchens in Concord take carts, hot water and cleaning chemicals every day. We match the coating to that wear and plan the work around your hours.

    Explore service

  • Garage Floor Coatings

    An attached garage that has held cars for years usually shows oil spots, tire marks and flaking old sealer. We grind that away, fill cracks, then build a coating that's easy to sweep clean.

    Explore service

  • Polyaspartic Floor Coatings

    Homeowners who can't give up a garage or patio for long often ask about quicker options. Polyaspartic coatings cure faster than standard epoxy, so we can usually hand the space back sooner.

    Explore service

  • Metallic Epoxy Flooring

    Some owners want a basement, bonus room or showroom that looks finished, not industrial. Metallic epoxy gives a glossy, swirled surface, and we grind and patch the slab first because every flaw shows through.

    Explore service

  • Urethane Cement Flooring

    Restaurant kitchens and food prep rooms deal with hot water, grease and daily washdowns that wear out thinner coatings. We put down urethane cement, a thick resin-and-cement floor built for heat and wet.

    Explore service

  • Polished Concrete Flooring

    In homes and shops with a sound slab, the concrete itself can be the finished floor. We grind it in finer and finer passes and harden it until it shines, with nothing to peel.

    Explore service

  • Stained Concrete Flooring

    Patios, entries and basement slabs that look plain and gray can take color without being covered. We clean and open the surface, apply the stain, then seal it so the color lasts.

    Explore service

  • Terrazzo Flooring

    Entries, kitchens and shop fronts with heavy foot traffic that need to look dressed up are where terrazzo fits. We set stone or glass chips in a binder, then grind and polish it smooth.

    Explore service

  • Basement Flooring

    Basement slabs sit against the ground, so moisture rising through the concrete is the first thing I check. We choose a system that suits what the slab shows, then prep and install it.

    Explore service

  • Concrete Grinding & Surface Preparation

    Older slabs often carry paint, glue, sealer or oil that keep a new floor from bonding. We grind down to clean, open concrete, because that step decides how well everything on top holds.

    Explore service

  • Concrete Sealing

    Bare patios, walkways and garage slabs soak up stains and wear at the surface over time. We clean the concrete and apply a sealer matched to how the space gets used.

    Explore service

  • Concrete Resurfacing & Overlays

    A patio or garage slab with scaling, old patches and worn spots doesn't always need tearing out. When the base is sound, we bond a thin overlay on top for a fresh, even surface.

    Explore service

  • Self-Leveling Concrete & Overlays

    Uneven slabs in older homes and converted rooms make it hard to lay tile, wood or a coating flat. We pour a self-leveling mix that flows out even, ready for the floor you want.

    Explore service

  • Pool Deck Coatings & Resurfacing

    Backyard pool decks take chlorinated water and bare feet, and older ones turn rough, stained or cracked. We repair the damage, then resurface or coat the deck with a texture that's kinder underfoot.

    Explore service

  • Concrete Floor Stripping & Removal

    Before a new floor goes in, a peeling coating or old adhesive usually has to come off. We strip it to bare concrete so the next floor bonds to the slab itself.

    Explore service

What coated and polished concrete floors look like

These photos show the kinds of floors we work on, from flake-coated garages to polished slabs and resurfaced pool decks. If a finish catches your eye, ask about it at your estimate and I'll explain what it takes.

  • Glossy red industrial floor surrounds rows of stainless steel tanks and processing equipment in a brightly lit facility.

  • Close-up of a gray speckled concrete floor with two diagonal control joints crossing.

  • Speckled epoxy floor in a large industrial interior with gray walls and exposed metal framing.

Working in Concord: permits, licenses and planning your floor

Before we grind anything in Concord, we sort out the permit question and make sure you know who's allowed to do the work. Here's how that goes, and what moves your price and schedule.

How permits work for a Concord floor job

Permits here are the city's call, and they go through the City of Concord Permit Center. The city keeps a partial list, from an older bulletin, of work that needs a permit on single-family and duplex homes, and it names roofs, water heaters, windows and air conditioning. Floor coatings aren't on it, so the list alone doesn't settle whether your job needs one.

When a job might need a permit, we check with the city before work starts and tell you what we find. If a permit is needed, work waits until it's issued, so that question is the first thing that can move your start date, and we settle it before we book one.

  • Work that moves soil needs a separate grading permit from the city's Engineering Division.
  • Work in the public strip by the street needs an encroachment permit from them.
  • Ask any contractor how they'll handle the permit question before you sign.

Licenses to ask about, and what moves the price

Two licenses are worth asking any flooring contractor about in Concord. The Contractors State License Board licenses people who build or alter buildings in California, and the city requires its own business license to do business here. We're fully licensed and insured, and the FAQ below explains when each one applies, so you can ask everyone you're comparing the same questions.

Price and schedule turn on the same few things, which is why I measure and look at your slab in person before giving you a number. On site, repairs and old layers add time, and after we finish, the wait is cure time, which depends on the coating you choose, since some systems go back into use sooner than others.

  • Floor size and the finish you pick set most of the material cost.
  • Old coatings, glue and oil stains add grinding time before anything goes down.
  • Cure time decides when you can walk, park or move furniture back in.

Get a free on-site estimate for your Concord floor

Call (925) 433-7858 or send the form, and tell us about your Concord floor and any permit question you have. We reply within one business day to set a time, and I come out to look at your floor in person for a free estimate. There's no obligation to go ahead.

(925) 433-7858

What Concord houses and slabs ask of a new floor

Concord has a wide mix of homes, garages, backyard concrete and businesses, and each asks something different of a floor. These are the things I look for when I walk a property here.

  • Garages that hold more than cars

    A lot of the garages we see here hold a car, a workbench, bikes and a spare fridge. That's why I ask how you use the space before recommending anything, because a floor that takes dropped tools and hot tires is a different build from one that just needs to look clean.

  • Older slabs carry old layers

    Concrete that's been in a house for years usually has something on it already, whether that's paint, a worn sealer, carpet glue or a patch from long ago. New coatings bond to clean concrete, not to old layers, so taking those off is often the biggest part of the job.

  • Backyard patios and pool decks

    Outdoor concrete here takes pool water, bare feet, furniture legs and spills from the grill. When we resurface or coat it, texture matters as much as color, because a deck that looks good but feels slick or rough underfoot isn't one you'll enjoy.

  • Shop and kitchen floors

    Business owners call us for shop floors and restaurant kitchens, and those jobs come with something homes don't have, a business that has to keep running. I walk the space with you first so we can split the work into sections or schedule it when you're closed.

  • Cracks and mapped quake zones

    Most older slabs have some cracking, and we repair it during prep so it's less likely to show through the new floor. If you'd like to know whether your property sits in a mapped earthquake hazard zone, the state's EQ Zapp map lets you type in your address and check.

What you get when we take on your floor

We're a small business based in Walnut Creek, started in 2021 to work in homes people actually live in. Here's how that shows up on a Concord floor, from the first look to the finished job.

I explain your slab before we touch it

The first thing I do on any job is look at the slab and tell you what I see, whether that's an old sealer, cracks, oil soaked in deep or signs of moisture. I spent my early years coating slabs in new buildings nobody had moved into, and homes are different, because every floor has a history that decides what it needs.

I want you to understand your floor well enough to make the call yourself and ask good questions of anyone you talk to, us included. If a simpler system will do the job, I'll say so, and if your slab needs more prep than you hoped, I'll show you why before you decide.

  • Licensed, insured and open about it

    We're fully licensed and insured on every job, and I'll go over both when I come out, so you aren't taking them on faith. That belongs in the conversation before any work starts, the same as the price and the plan for your floor.

  • The owner looks at every job

    I come out to look at every job myself, and our trained installers do the work with me on site. So the person who looked at your slab and explained the plan is standing on it while the work gets done.

  • Time spent on hidden prep

    Grinding, crack repair and cleaning all end up hidden under the finish, so they're the easiest steps to rush. They're also what decides how the floor holds up, so we give them the time they need rather than trimming them to get the price down.

  • Satisfaction guaranteed on every job

    That's our promise on every floor we do in Concord and the cities around it. If you'd like to talk through your floor first, call (925) 433-7858 or send the form above, and I'll come take a look.

Concord flooring questions about permits, licenses and cost

These are the questions Concord homeowners tend to ask before hiring a flooring contractor. The answers draw on the city's and the state's own rules, plus what we see on the job.

How do I find out which permits my Concord floor project needs before I get bids?

Start with the city's Permit Center page, which points you to a way to look up your zoning, see which permits your project requires and estimate the fees. Doing that first means you know what the job involves before anyone quotes it. Once you bring us in, we do our own check with the city before work starts.

Does a flooring contractor based outside Concord need a Concord business license?

Yes. The city requires a business license to do business in Concord, and that includes state-licensed contractors and anyone working here from an office in another city. We're based in Walnut Creek, so it's a fair question to ask any contractor you're comparing, us included.

When does a flooring contractor need a California contractor license?

A contractor needs a state license when the project requires a building permit, uses any additional workers, or when one or more contracts on the project total $1,000 or more. That $1,000 figure counts labor and materials together, across every contract on the project.

What causes the price of an epoxy garage floor to go up in Concord?

Prep is usually what pushes the price up most, so a garage slab with old sealer, paint, soaked-in oil or cracks costs more than clean, bare concrete. The size of the garage and the system you choose come next, because a solid-color epoxy, a flake coating with colored chips scattered into the base and a polyaspartic topcoat each take different material and time. I'll walk you through each of those on your own floor so you can see where the money goes.

Service areas

We're based in Walnut Creek and work across the cities around it, including the ones listed here and others nearby. If you don't see your city, call (925) 433-7858 or send the form and ask.

Ask about your location
(925) 433-7858Get an estimate